New 2010 Army green FJ owner

Replies to This Discussion

Permalink Reply by NestahEdition on January 3, 2011 at 3:10pm

You can buy that type of switch ( I think the same switch that comes with SPOD kit) here;

http://www.otrattw.com/proddetail.php?prod=V1D1J66B-AYCN5-17U

 

The OEM  switches are nice but pricey, see sample pictures below;

 

 

 

 

• ▶ Reply

Permalink Reply by NestahEdition on January 4, 2011 at 11:23am

Yes. you can use the OEM 4- pin switch with the PIAA driving  lights  kit

• ▶ Reply

Permalink Reply by NestahEdition on January 4, 2011 at 7:32pm

I'll buy the following at Radio Shack;

> Quick Splice Connector with Male Disconnector - tap to the illumination wires (Rear Diff Lock harness)

> 18 Gauge wire (Reg, Black, Green) for extension if needed

> Crimp-on butt connectors for 22-18 gauge wire.

> Flat pin connectors are perfect for 14 to 16-gauge wire - tap to the driver side fuse block for always ON/Switched option.

• ▶ Reply

Permalink Reply by potatomutato on January 4, 2011 at 7:41pm

don't forget a dremel and/or file for the aftermarket switches.

• ▶ Reply

Permalink Reply by DWH on January 4, 2011 at 8:11pm

I have a Dremel and files and some wire

• ▶ Reply

Permalink Reply by TOE 4X4 on January 2, 2011 at 11:57am

Welcome to the group.

• ▶ Reply

Permalink Reply by NekGuda on January 2, 2011 at 4:47pm

Welcome to the group...Great color choice!!

• ▶ Reply

Permalink Reply by Steve on January 2, 2011 at 5:39pm

Welcome love the AG..

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page