FJ Cruisers of Northern California
Califabrication Straight axle Complete!
I've finally started my build, Dana 60 HP for the front and Sterling 10.25-35 spline for the rear. ONE TONSNext step to get the rear, then install gear and lockers. Then fully armor them out the califab way!! Then the true fun will begin......42 inch wrangler MTRs, Dual cases, Exo cage, rear plate bumper, beadlocks, 14" fox coilovers, 3 link front, the rear is undecied, (either 3 link or leafs).....STAY TUNED FOR MORE FUN....the build thread will be on Califabrication; instagram or facebook....
Views: 5922
Replies to This Discussion
-
Permalink Reply by crawlinrollins on
-
Fun stuff can't wait to get mine going
-
Permalink Reply by Chance Hokanson(Califabrication) on
-
Got all the things to start building my dual Transfer cases! Fully clockable adapters by inchworm.
And on to tearing apart the tcase to make my doubler box....
Got the doubler off, now time for the assembly :)
-
-
Got the rims the other day, and today I got 4 rock rings to weld on them. I also have frame reinforcements plates for the front and Califab plates that will be welded on the bumper.
-
-
Starting to weld them on....
-
-
Steering pitman arm, custom made...
Dual cases complete, 4.9:1 final low range(4lo) ratio
-
-
Im either gonna heat it up n mold it myself or find a local shop to chop it down 3 inches....
-
Permalink Reply by sbechtold on
-
3 heat guns and a little pressure worked for me. You don't need to move it much.
-
-
Ok awesome! When I'm done we'll have to plan a trip to fordyce! Have you ever been?
-
Permalink Reply by Back in Black (FJ4 Tahoe) on
-
Shotgun! in either rig
Badge
NorCal FJ Twitter Feed
The NorCal FJ Shop
NorCal FJ Network Status
© 2024 Created by NorCal FJs.
Powered by
