NorCal FJs

FJ Cruisers of Northern California

Anyone interested in swaybar disconnects ?? Gauging interest in the local (norcal) area..
Here are the specs;
QR Joints
3/4'' hiem joints rated @ 27000 lbs ultimate radial static load
custom misalignment spacers
1.250x120 wall dom tubing
1/4'' safety lock pin
Grade 8.8 bolts
Swaybar
Sectioned with 1/2'' steel connection plate and 1/4'' top reinf plate
Connection plate is recessed for lugs,centering and clearance
High strength racing studs pressed in a tack welded
Low profile conical lug nuts.

Benefits
This setup comes off quickly and is easy to reinstall.No need to remove your skids and swaybar to reap the benefits of increased articulation and a smoother ride offroad. Simply remove the 2 nuts in front of the tire, pull out the safety pin's, and your done.Pics show two different sets.
[IMG]http://img.photobucket.com/albums/v117/markn1964/swaybardiscov2050.jpg[/IMG]

Views: 217

Reply to This

Replies to This Discussion

I can help. not working either.
just so everyone is aware, you will need limit straps and longer brake lines before you pull the pin on these, I got longer brake lines last year, and still haven't installed them just need to find a good source for the limit straps. Anyone know of some good ones?
I'll check w/ my buddy that builds off-road race buggies. I know he has his custom made to length.
found the ones the AZFJ crew uses, they are beefy
http://www.superduty-hq.com/sdhqquadwraplimitstraps.aspx


Oh and I went with Man a Fre's 2" longer brake lines DOT approved
Not exactly true.My donahoes/icons have internal bump stops and the brake line's still have a bit of play when the sb is disconnected and at full droop.Each set up will need to be checked since I don't know the spec's on all manufacturer's.I also have a 1'' diff drop so my cv joints do not come close to binding so no limiting strap is needed in my case.It will be easy to check if you need extended brake lines or straps.With the sb disconnected lift your truck from the crossmember with the wheels/tires still on.Check the brake lines for free play and rotate the wheel's to check the cv's for binding.The uptravel (stuff) is where your gaining most of the additional travel and you may need longer bump stops depending on tire size.Again every set up is different and will need to be checked.
those internal bump stops will be destroyed with repeated off the ground action. trust me I've already rebuilt my Kings and they where gone
X2, Icons have the internal bump stops. Bz, not sure if the Kings have the same kind of internal bumps though.
definitely want some! is this for the front and rear?
Thanks for the offers for help.Right now I'm in the testing phase.Stay tuned.I'll post the results and some pics soon.
Do you have idea of price yet for your disconnects?

BTW, I love your WEE wheels, those are the ones I will eventually get.
Yes,I have a idea but not set on it yet.If anyone is interested in a prototype shoot me a pm, I have one.

RSS

Badge

Loading…

NorCal FJ Twitter Feed

The NorCal FJ Shop

The Black Bear Bag
Use it for school, as a bug-out bag, or for your spy gear that only you know about.

SHOP NOW!

NorCal FJ Network Status

© 2024   Created by NorCal FJs.   Powered by

Badges  |  Report an Issue  |  Terms of Service