FJ Cruisers of Northern California

Califabrication Straight axle Complete!

I've finally started my build, Dana 60 HP for the front and Sterling 10.25-35 spline for the rear. ONE TONSNext step to get the rear, then install gear and lockers. Then fully armor them out the califab way!! Then the true fun will begin......42 inch wrangler MTRs, Dual cases, Exo cage, rear plate bumper, beadlocks, 14" fox coilovers, 3 link front, the rear is undecied, (either 3 link or leafs).....STAY TUNED FOR MORE FUN....the build thread will be on Califabrication; instagram or facebook....

▶ Reply to This

Replies to This Discussion

Permalink Reply by Chance Hokanson(Califabrication) on February 22, 2015 at 6:59pm

Sittin next to the 4Runner...

Attachments:

image.jpg, 2.3 MB

▶ Reply

Permalink Reply by tsy87 on February 23, 2015 at 8:31am

it's so beautiful! What kinda wheels are those btw?

▶ Reply

Permalink Reply by Chance Hokanson(Califabrication) on February 23, 2015 at 5:34pm

They are Procomp steelies with rock rings that I welded on...

▶ Reply

Permalink Reply by Chance Hokanson(Califabrication) on March 6, 2015 at 10:23pm

▶ Reply

Permalink Reply by PhoS on March 7, 2015 at 2:35pm

Massive!

▶ Reply

Permalink Reply by Chance Hokanson(Califabrication) on March 21, 2015 at 9:41am

Been a while since Ive updated this thread.... but since last Ive built my crossmember for the dual cases, welded up my lower links, installed my crossmember and welded up my 3rd link bracket. ....Heres a pic of it installed and partially painted....

▶ Reply

Permalink Reply by Chance Hokanson(Califabrication) on March 21, 2015 at 9:44am

Ive also modified the gas tank to fit the dual cases....that was a pain in the ass!!! but its done now and reinstalled and everything fits great!.......now time for driveshafts to be made and to plumb all the brakes and power steering and she will be ready for her first drive:)!!!!!!!

▶ Reply

Permalink Reply by Navedtra on March 21, 2015 at 12:02pm

I need to start playing the lottery

▶ Reply

Permalink Reply by Steve Hope on March 21, 2015 at 7:55pm

Then you will have about the same odds as those of us who don't play :>)

Steve.

▶ Reply

Permalink Reply by Chance Hokanson(Califabrication) on March 23, 2015 at 10:05pm

Put her shoes on for one more time before final teardown.... took all measurements for the driveshafts today!

Ready to weld it all up!!!! Hoping to take her for a little spin this weekend!

▶ Reply

Permalink Reply by Markie Sharkie on March 25, 2015 at 8:56am

Hollister for a test run? ;)

▶ Reply

Permalink Reply by Chance Hokanson(Califabrication) on March 25, 2015 at 10:16am

Gonna plan a little meet n greet at Prairie city....the FJ and 4Runner both on 40s will be out there....hopefully in about a month or so and then yea hollister later this summer:)