Ricochet Air Dam installed

Replies to This Discussion

Permalink Reply by UlySi on November 26, 2012 at 4:09pm

Plasma cutter!!!!!!

• ▶ Reply

Permalink Reply by Back in Black (FJ4 Tahoe) on November 26, 2012 at 8:41pm

Boztec can cut the metal like butter!  give John a call.

• ▶ Reply

Permalink Reply by Shaman Rawb on November 27, 2012 at 1:00pm

Thanks BnB. I will when I'm ready. I will definitely need some help.

• ▶ Reply

Permalink Reply by The Orca on November 26, 2012 at 9:47pm

Quick tip if you want to hide that wiring a little better, drill a hole on the inside of your roof rack and run the wires in through the roof rack, out the front driver's side mounting plate and through the notch in the roof. That's what i did when i installed my lights and its worked like a charm so far. Some people aren't too fond of drilling their roof rack, but for me it was well worth it

• ▶ Reply

Permalink Reply by Shaman Rawb on November 27, 2012 at 1:01pm

That sounds like the best bet too. I was considering going from inside the rack, through the roof after I get the other 2 lights, but pretty intimidated with the amount of work.

• ▶ Reply

Permalink Reply by The Orca on November 27, 2012 at 3:56pm

Don't be intimated at all. It seems like a daunting task but if you set aside weekend just to totally focus and get it done, you'll find that its not nearly as bad as it seems

• ▶ Reply