Ome med front question

Replies to This Discussion

Permalink Reply by Estysalinas on January 27, 2012 at 11:42am

I know the 5100s with the spacers+ OME springs won't work - I had to jump up to the OMEs from my 5100s. My guess is that without the spacer you would probably be ok with the 5100s but I would ask ARB....or wait until other chime in here. 

• ▶ Reply

Permalink Reply by Shaman Rawb on January 27, 2012 at 12:21pm

Something doesnt make sense to me.
If the 5100s provide 2.5 inches of lift by raising the seat, then you are extending the shaft of the shock 2.5 inches. If you lower the seat back to stock, and use a ome spring, you are also extending the shaft 2.5 inches because the spring is 2.5 inches taller (well including spring strength and such). Correct? Don't you add a spacer on top of the whole strut assembly? Why is this an issue?
Please help me understand and check my numbers. Thanks.

• ▶ Reply

Permalink Reply by Shaman Rawb on January 28, 2012 at 5:21am

Installed the OME Mediums in the front. OMG what was I missing. Left the spacers out. Good idea.

Thanks for the advice Esty. It got me really thinking about the math. I think if I had installed them, my A-Arms would be very close to rubbing the springs. 

:)

• ▶ Reply

Permalink Reply by Estysalinas on January 28, 2012 at 10:36am

Glad they went in well! Let us know how the combo works out on the trail!

• ▶ Reply

Permalink Reply by LumbaJak (Max) on January 28, 2012 at 5:12pm

Looks like I'm a little late to reply but i have the 5100 front shocks and the OME 885 springs on the front and they work out real well you just have to have the 5100's on their lowest setting. 

• ▶ Reply

Permalink Reply by Shaman Rawb on February 3, 2012 at 3:24pm

Thanks Max!

• ▶ Reply

Permalink Reply by SPARIS on February 3, 2012 at 3:22pm

Hello shaman. im scott and just join the nor cal FJ about two weeks. Im excited to join the FJ team, find trails and get ready  and upgrade my tires. Your FJ looks perfect size with the height and tires. I wanted to know what kind of shock you have on the FJ? Front adjustable coil over kit with Bilstein 5100's or the Bilstein 5100 Series Ride Height Adjustable Shock Absorber ? Did you add in suspensions for the wheels to make it level? Will it work with a 33" tire? Thanks advance for you help.

• ▶ Reply

Permalink Reply by Shaman Rawb on February 3, 2012 at 3:27pm

Hey Scott,

I have the Bilstein 5100 shocks only, with OME 886's in the front and OME 895's in the rear. 

I LOVE the ride. I would swap out the rears to 896's if I could find a cheap set just to firm it up a little more, but it is not necessary. It did really well in Death Valley this weekend. 

Yes, a 33 should fit. I am running 285/70/17's which are 33" tall, but skinnier.

R

• ▶ Reply

Permalink Reply by SPARIS on February 5, 2012 at 8:02pm

Thanks alot. Where did you get that shocks and OME? By the way A great Clip from Death Valley and your FJ!

• ▶ Reply

Permalink Reply by Shaman Rawb on February 5, 2012 at 8:05pm

Thanks Scott.

This is the kit I bought. I then replaced the rear spacer with springs which I got from the guys here used!

• ▶ Reply

Permalink Reply by SPARIS on February 5, 2012 at 8:26pm

Right on. see you on the trail sometimes soon.

• ▶ Reply