FJ Cruisers of Northern California

Looking for BMC in the bayarea

Redirected from FJ forum, and looking for a place for BMC. I went to a few shops, and they want $300 to cut and weld.

▶ Reply to This

Replies to This Discussion

Permalink Reply by Back in Black (FJ4 Tahoe) on November 21, 2017 at 3:22pm

Welcome, Shaffer Offroad of Alameda Or Boztec of Alameda

▶ Reply

Permalink Reply by Steve Hope on November 21, 2017 at 6:45pm

or easy do yourself, welding not necessary.

▶ Reply

Permalink Reply by Yose FJ (David) on November 21, 2017 at 9:57pm

1). Nestor.

2.) Chance at Califabrication.

▶ Reply

Permalink Reply by Zaku65 on November 22, 2017 at 10:56am

Mudrak, in Sonoma will do it. When I talked to Gary he said they do a pretty clean BMC to make it look like OEM. My guess is that they weld a cover for the chop.

▶ Reply

Permalink Reply by Steve Hope on November 22, 2017 at 6:29pm

Welding a cover is not necessary, just do a clean chop and paint black.The plastic cover on the mudflap keeps most water off it and the 10 gauge steel plate is plenty strong enough not to need a welded cap around it. I am sure the chop was not necessary for the tires I installed, but done anyway. I am running KM2's 285/75R16 and not even close to hitting what is not there now.