NorCal FJs

FJ Cruisers of Northern California

Installing bushwhackers with a snorkel

Ok, I just purchased a snorkel and I will be buying some Bushwhacker pocket flares in March.  My questions are:  which should I mount first and does anyone have either experience doing this mod or a template (maybe the left over plastic you cut off the flare?)  Or can you recomend someone who does this well for a reasonable cost?  I've been all over the blue room and I know MAF sells flares that include the cutout for a snorkel.  I also know they charge and extra $100 for this option and that it tends to not match up at all (from what people are saying).  Any help would be appreciated.  

Views: 233

▶ Reply to This

Replies to This Discussion

Permalink Reply by UlySi on January 6, 2013 at 9:34pm
Call Bushwacker they make the rf flare cut to fit the snorkel!!
Permalink Reply by UlySi on January 6, 2013 at 9:36pm
Oh contact Nestor he cut back in black johns flare when they installed johns snorkel and with luck Nestor's fee is help with gas out to you!!
Permalink Reply by NestahEdition on January 6, 2013 at 10:26pm
I made a template from my bushwacker (thanks again Set) install and used it on Back in Black (John) PRG install last month.

Currently the template is out on a rental to "Blue Room" members from Oregon.
Permalink Reply by Back in Black (FJ4 Tahoe) on January 6, 2013 at 10:39pm

Nester for the win!  He did an amazing job with my Snorkel install.

Thanks buddy!!

Permalink Reply by Meestar Jim on January 6, 2013 at 11:19pm

Hey Nestor, did you have to take the snorkel off to install the flare? I'm wondering if I could get you to cut my flare when I get them? I'd be more than happy to travel to you and compensate you what you feel would be appropriate. I looked at your install on your page and it looks great!

Permalink Reply by NestahEdition on January 7, 2013 at 8:26am
Install the Snorkel first, then the Bushwacker fender flares. To speed up the Snorkel install, buy the srew grommets for the fender liner.

Yes, i can cut the Bushwacker flares. The template should be back from rental in a few days.
Permalink Reply by Meestar Jim on January 7, 2013 at 9:58am
Hey Nestor thanks! I'll let you know when I get the bushwhackers. Where can I purchase the screw grommets for the fender liners? Would TRDparts4u have them?
Permalink Reply by NestahEdition on January 7, 2013 at 9:45pm

Permalink Reply by NestahEdition on January 7, 2013 at 11:12am
I can source/supply the screw grommets for the fender lines.
Permalink Reply by Meestar Jim on January 7, 2013 at 4:36pm

Oh wait, are those the pieces that hold the inner fender on?

Permalink Reply by NestahEdition on January 7, 2013 at 4:55pm

Yes.

Permalink Reply by Meestar Jim on January 7, 2013 at 12:09pm
Cool! What are these brackets for? ( I haven't even read the snorkel install directions so maybe I'm missing some info easily obtainable...). And what will I owe you for them?

RSS

Badge

Loading…

Get Badge

NorCal FJ Twitter Feed

The NorCal FJ Shop

The Black Bear Bag
Use it for school, as a bug-out bag, or for your spy gear that only you know about.

SHOP NOW!

NorCal FJ Network Status

© 2024   Created by NorCal FJs.   Powered by

Badges  |  Report an Issue  |  Terms of Service

Sign in to chat!