FJ Cruisers of Northern California

dynamat installation

Can someone please recommend a shop in the bay area that can install dynamat for the FJ?
I know it's a DIY thing but it will take me soo long to finish doing the roof/doors/rears.
I'm thinking a professional shop can finish it in a day?

Thanks for any info.

▶ Reply to This

Replies to This Discussion

Permalink Reply by Boss73 on December 1, 2009 at 3:36pm

Honestly the only thing that wil take you a "long time" is the headliner. Front door panels come off quickly as does the rear. Also the floor in the cargo area is not bad either. I would say it would only be like a couple of hours to get the doors, front and rear, and the floor removed, dynamat-ed and then reinstalled. .

Of cours ethen there is the header, which I have never removed, will most likely be the most time consuming. I am sure that other out here will chime in on that.

But you should be able to get everything done..

▶ Reply

Permalink Reply by campy7 on December 1, 2009 at 3:55pm

will 2 bulk packs be enough for the doors and rear floor?

▶ Reply

Permalink Reply by Boss73 on December 1, 2009 at 4:15pm

Hmm not real sure. Whe I did mine I "borrowed some" So I am not sure.. Maybe Tater or Pit or C4b will chime up here I believe they are in the know about how much was used

▶ Reply

Permalink Reply by TRD Black on December 1, 2009 at 5:37pm

I don't remember where I saw it on the blue room, but there was a very thorough write up on installing Dynamat with lots of photos...

▶ Reply

Permalink Reply by campy7 on December 2, 2009 at 6:36am

pardon my ignorance, but where's the blue room?

▶ Reply

Permalink Reply by Estysalinas on December 11, 2009 at 6:02am

http://www.fjcruiserforums.com/

▶ Reply

Permalink Reply by potatomutato on December 2, 2009 at 1:16am

yeah, two bulk packs will be enough to do driver/passenger doors, suicide doors and two layers on the rear cargo area and sides. i've got a roller if you want to borrow it...makes things much easier.