NorCal FJs

FJ Cruisers of Northern California

John over at BoxTec in Alameda has graciously offered to weld BMC's for folks. He says that the 3rd of March (Saturday) is looking like a good day to do it, or possibly a later date.

.

If you'd like to get yours done he asks the following:

Have the cut done and the cap prepared. The cap material should be at least 10 ga (1/8") if not 3/16" steel. There is a template that works pretty well and BZ knows how it works.  If anybody still needs the BMC done, you should talk to BZ and have that done before the welding date. If its done right all it takes is a straight piece of flat bar.

Post up your name here and state if you only need the cap welded on, or if you need the BMC and the cap welding.

.

Thanks everyone, and thanks especially to Bozly !!

Views: 768

Reply to This

Replies to This Discussion

Hey guys,

I need both the BMC and the weld. I'm attempting to contact BZ to get this done before the 3rd.

Thanks,

Aeon

gimme a call I'll be at Boztec all week my # 925seven zerofive doublezero 6nine

we will be at the shop 9:30ish on Saturday

Good morning
bz thanks for your advice on the bmc. I wont be able to make it this weekend
Thanks again
Keltic

Hey guys thanks for offering this. I'll be headin over there tomorrow. :D

Thanks for the chop n weld! :)

Dang! Wish I could have made this one... had WAY to much going on this past weekend.

I can hook ya up with the chop anytime, gimme a call

RSS

Badge

Loading…

NorCal FJ Twitter Feed

The NorCal FJ Shop

The Black Bear Bag
Use it for school, as a bug-out bag, or for your spy gear that only you know about.

SHOP NOW!

NorCal FJ Network Status

© 2024   Created by NorCal FJs.   Powered by

Badges  |  Report an Issue  |  Terms of Service