FJ Cruisers of Northern California
Anyone interested in swaybar disconnects ??
Anyone interested in swaybar disconnects ?? Gauging interest in the local (norcal) area..
Here are the specs;
QR Joints
3/4'' hiem joints rated @ 27000 lbs ultimate radial static load
custom misalignment spacers
1.250x120 wall dom tubing
1/4'' safety lock pin
Grade 8.8 bolts
Swaybar
Sectioned with 1/2'' steel connection plate and 1/4'' top reinf plate
Connection plate is recessed for lugs,centering and clearance
High strength racing studs pressed in a tack welded
Low profile conical lug nuts.
Benefits
This setup comes off quickly and is easy to reinstall.No need to remove your skids and swaybar to reap the benefits of increased articulation and a smoother ride offroad. Simply remove the 2 nuts in front of the tire, pull out the safety pin's, and your done.Pics show two different sets.
[IMG]http://img.photobucket.com/albums/v117/markn1964/swaybardiscov2050.jpg[/IMG]
Here are the specs;
QR Joints
3/4'' hiem joints rated @ 27000 lbs ultimate radial static load
custom misalignment spacers
1.250x120 wall dom tubing
1/4'' safety lock pin
Grade 8.8 bolts
Swaybar
Sectioned with 1/2'' steel connection plate and 1/4'' top reinf plate
Connection plate is recessed for lugs,centering and clearance
High strength racing studs pressed in a tack welded
Low profile conical lug nuts.
Benefits
This setup comes off quickly and is easy to reinstall.No need to remove your skids and swaybar to reap the benefits of increased articulation and a smoother ride offroad. Simply remove the 2 nuts in front of the tire, pull out the safety pin's, and your done.Pics show two different sets.
[IMG]http://img.photobucket.com/albums/v117/markn1964/swaybardiscov2050.jpg[/IMG]
Views: 213
Replies to This Discussion
-
Permalink Reply by Bz on
-
you will need to get extended lenght brake lines if you get these i'm interested
-
Permalink Reply by Bozly on
-
I'm interested but who's building these parts? There is some complex bending, CNC machining and fixturing involved in this kit.
If any of the custom parts require fabrication of "flat material" parts, ie a sheet of steel, SS, or whatever I'd be glad to do this.
-
Permalink Reply by 2007fj on
-
I'm a one man show.I use a jig/fixture for the bars and hand shape the flat plate.Spacers are cnc'd.Bars are sectioned so no bending and thanks for the offer I may hit you for something in the near future.
-
-
I also do the 1 man show thing.
PM me and let's talk about what we do, sound like we could help each other out.
-
Permalink Reply by paraextreme on
-
I'm interested how much?
-
Permalink Reply by C4B_ROCKs on
-
man those look so nice and would love to have it on the rig...How much?
Badge
NorCal FJ Twitter Feed
The NorCal FJ Shop
NorCal FJ Network Status
© 2024 Created by NorCal FJs.
Powered by
