FJ Cruisers of Northern California

OEM Sliders 2012 TT

Like new, no damage OEM Sliders from 2012 TT. Asking 250.00 obo.

Attachments:

20140727_195921.jpg, 1.9 MB

▶ Reply to This

Replies to This Discussion

Permalink Reply by sandyann on July 29, 2014 at 12:02pm

Shane - Do these just bolt on and do you have all the original bolts? If yes then I want these.

▶ Reply

Permalink Reply by Shane on July 29, 2014 at 12:18pm

Hey Ann - Yes as far as I know they should bolt right on, I do have the original bolts for them. Unfortunately they are pending sale as of this morning. If it falls through you will be the first to know.

▶ Reply

Permalink Reply by Dseven (iain) on July 29, 2014 at 12:19pm

FWIW, I recently acquired a set of used sliders. I bought all new 10.9 grade M8x25 yellow zinc bolts from Fastenal. They had to order them, but they arrived the following morning. I think they were about 40c each, and it looks like you only need 12 for those OEM sliders (the BudBuilts use all 16 holes), but they did charge a bit for shipping. You'll want flat washers too - I was able to reuse those.

▶ Reply

Permalink Reply by Shane on July 29, 2014 at 12:35pm

Correct you only need 12 for these which I found odd since there were 16 holes pre-drilled. But I do have all the orig bolts and washers. I'll keep you posted on the sale.

▶ Reply

Permalink Reply by sandyann on July 29, 2014 at 12:37pm

Great!

▶ Reply

Permalink Reply by Shane on July 29, 2014 at 4:13pm

These have sold!

▶ Reply

Permalink Reply by Shane on August 1, 2014 at 2:13pm

Hey Ann -

Not sure if you are interested in paying shipping, but a pair of the OEM sliders were posted on the FJ Cruiser Parts page on FB. They are about the 3rd item down.

https://www.facebook.com/groups/688991961165326/