NorCal FJs

FJ Cruisers of Northern California

Hey Guys,

 

So the next big mod for me is going to be adding an sPod system into my rig.  Additionally I need to add some extra power outlets (Thinking Blue Sea USB and Cigarette plugs) total I am thinking 1 USB and 1 dash socket up front, 2 USBs for the back seat mounted to the center consule, and then 1 USB and 2 dash sockets in the very back.

 

Question is, can I wire all these to one sPOD port so I can just have one Aux switch on the panel that will kick them all on, or should I go with a secondary fuse box and run them all from there? 

 

Hope I am making sense on this one. When it comes to electrical my IQ drops a bit..

 

Thanks

Josh

Views: 135

Reply to This

Replies to This Discussion

You could do both ... use an sPOD port to feed a second fuse block inside the cab somewhere (probably under the dash). You're going to need to distribute out the feed to the various locations somehow anyway. An advantage of the in-cab fuse block is that a short in one of the outlets wouldn't take out the whole set.

i would talk to Nester, he is the wizard when it comes to things like that.

RSS

Badge

Loading…

NorCal FJ Twitter Feed

The NorCal FJ Shop

The Black Bear Bag
Use it for school, as a bug-out bag, or for your spy gear that only you know about.

SHOP NOW!

NorCal FJ Network Status

© 2024   Created by NorCal FJs.   Powered by

Badges  |  Report an Issue  |  Terms of Service