NorCal FJs

FJ Cruisers of Northern California

Eh 8mm bolts - slidders

OK so I mounted the new slidders on my fj with the 8 mm bolts (who's Idea was this) that were suplied with them palm to fore head wtf. Have any of you guys mounted your slidders like this and not have them ripped off???? Im going to stitch weld them next friday then Ill feel better... Opinions???

Views: 68

▶ Reply to This

Replies to This Discussion

Permalink Reply by Cowboy on October 12, 2012 at 8:37pm

My sliders are secured with bolts and although I have tried.  I have not been ripped off yet.   \m/ ^-^ \m/

If I had a welder though.  I would go that route..

Permalink Reply by UlySi on October 12, 2012 at 9:44pm
Tack the corners on I think that is what I might do.
Permalink Reply by crawlinrollins on October 12, 2012 at 11:05pm

IM going to do 1 inch tacks on the sides and then a stitch on the bottom.. cool beans

Permalink Reply by jluu on October 14, 2012 at 12:59pm

The correct hardware to use for sliders is M8x1.25" x 35mm grade 10.9. You will need 16 of these and flat washers for both sides.

RSS

Badge

Loading…

Get Badge

NorCal FJ Twitter Feed

The NorCal FJ Shop

The Black Bear Bag
Use it for school, as a bug-out bag, or for your spy gear that only you know about.

SHOP NOW!

NorCal FJ Network Status

© 2024   Created by NorCal FJs.   Powered by

Badges  |  Report an Issue  |  Terms of Service

Sign in to chat!