FJ Cruisers of Northern California
Body Mount Chop Welding by Bozly !
John over at BoxTec in Alameda has graciously offered to weld BMC's for folks. He says that the 3rd of March (Saturday) is looking like a good day to do it, or possibly a later date.
.
If you'd like to get yours done he asks the following:
Have the cut done and the cap prepared. The cap material should be at least 10 ga (1/8") if not 3/16" steel. There is a template that works pretty well and BZ knows how it works. If anybody still needs the BMC done, you should talk to BZ and have that done before the welding date. If its done right all it takes is a straight piece of flat bar.
Post up your name here and state if you only need the cap welded on, or if you need the BMC and the cap welding.
.
Thanks everyone, and thanks especially to Bozly !!
Views: 605
Replies to This Discussion
-
Permalink Reply by Aeon on -
Hey guys,
I need both the BMC and the weld. I'm attempting to contact BZ to get this done before the 3rd.
Thanks,
Aeon
-
Permalink Reply by Bz on -
gimme a call I'll be at Boztec all week my # 925seven zerofive doublezero 6nine
-
Permalink Reply by Keltic on -
Good morning
bz thanks for your advice on the bmc. I wont be able to make it this weekend
Thanks again
Keltic
-
Permalink Reply by Aeon on
-
Hey guys thanks for offering this. I'll be headin over there tomorrow. :D
-
Permalink Reply by Botched on -
Dang! Wish I could have made this one... had WAY to much going on this past weekend.
- ‹ Previous
- 1
- 2
- 3
- Next ›
Badge
BozTec
NorCal FJ Twitter Feed
Current Member Color Count
Sun Fusion: 34
Titanium Metallic: 98
Silver Fresco: 23
Black Diamond: 71
Black: 22
Black Cherry: 26
Brick: 15
Sandstorm: 29
Army Green: 16
Iceberg White: 14
Quicksand: 3
Calvary Blue: 3
TRD SE: 13
Trail Teams SE: 30
N/A or Other: 67
as of 05/31/11 at 00:01
The NorCal FJ Shop
© 2012 Created by NorCal FJs.
